Search Register Log In View Cart Info

Pleasant Hill Grain
Fine Kitchen Equipment Values

Would you like to buy the very best... for less... and enjoy personal service too? At Pleasant Hill Grain we offer the finest kitchen tools, at great prices, and provide personal service both before and after your purchase. We appreciate your visit today and hope you enjoy your time at our shop. Please call or e-mail if you have questions or if we can assist you in any way.  We like to help and we'd love to hear from you!

1-800 number below for orders or assistance

Shop with confidence: 30-Day Satisfaction Guarantee ~ Our Company Policies

Use of the Bosch/FGM Adapter
.
This page illustrates the use of the Bosch Adapter for the Family Grain Mill, which allows Family Grain Mill accessories to be mounted on the Bosch Universal Mixer.

You can also use this adapter to put the flaker mill onto a Bosch Concept mixer, if you first attach the "accessory adapter" to the Concept mixer. To be sure this is clear, please understand that the "Concept Accessory Adapter" for the Concept mixer is different from the FGM adapter, and two adapters are needed to use the flaker on the Concept... you need either an angled or straight Concept Accessory Adapter, plus you need the FGM adapter. (Most other Concept accessories do NOT require use of any adapter at all -- the adapters are principally just for the meat grinder and the flaker mill.)


This is the Bosch Universal set on its back, which is the normal operating position for using several accessories including the meat grinder and any of the Family Grain Mill components. (Family Grain Mill components are manufactured in Germany by Messerschmidt, and they carry a lifetime warranty.)
 
This is a closeup of the adapter itself. In this image, the end that's pointing to the lower left is the end that attaches to the Bosch Universal. The end pointing away is where FGM components are to be attached. (The rest of the images on this page show the adapter flipped the other way around.)

The red button is connected to a spring-loaded pin which locks FGM components onto the adapter. The pin snaps in place automatically for attachment; for removal, the red button must be pulled back before the FGM component is removed.

The long flat piece extending toward the lower right corner of the picture is the lever that's used to lock the adapter in place on the Universal. Following images will show how the lever is used.
 
This is a closeup of the Universal's low-speed drive attachment. This photo was taken with the Universal on its back, ready for attachment of the FGM adapter. The arrow points to the slot which the adapter's locking lever fits into.
 
In this image the adapter has been slipped onto the Universal's drive. The locking lever (shown by the arrow) has not yet been rotated into the locking position.
 
Here the locking lever has been rotated to the right, securing the adapter onto the drive.
 
Now the Family Grain Mill flaker has been attached to the adapter. With the addition of a container to catch the flaked grain, the unit is ready to use. The same procedure is used for the grain mill, vegetable processor, etc.

 

Pleasant Hill Grain Home Link
Pleasant Hill Grain®
1-800-321-1073 toll-free for orders & info
From outside the U.S. call 1-402-725-3835
210 South 1st Street, PO Box 7, Hampton, Nebraska 68843-0007
 E-mail | Info | Site Search | Share with a Friend | Product Index | Home
ViewCart

*All prices $USD. Free-ship offers are for US 48 states (exceptions noted in product info) & by FedEx Ground principally. Inquire for other shipping. No sales tax collected except in Nebraska.
Website updated June 14, 2013 | All Contents Copyright Pleasant Hill Grain® All Rights Reserved.