
Berkey Light® Standard Model
(Non-Illuminated)
Tested with extreme pathogenic contamination levels above 1 billion pathogens per liter, Black Berkey® water purification elements reduced pathogens to below detectable levels... 99.99999% reduction. |

Berkey Light® White-LED illuminated model. Powered by AC or rechargeable batteries.
 |
 |
White-LED
Base
|
Blue-LED
Base |
LED's are directional and can be used separately for portable lighting. The white LED's are much brighter than the blue.
Every time I've contacted Pleasant Hill Grain, I have been greeted swiftly, professionally and very courteously. Your conduct is a breath of fresh air in today's society. I have recommended your products to many of my friends. – Mac in Alturas, CA
|
|
| Berkey Light® Water Purifier with Copolyester Housing |
The Berkey Light® System is the newest development in Berkey water purification. Shell construction is 50-mil thick, BPA-free Copolyester. Every Berkey Light® has a capacity of 2.75 gallons, can accept up to four purifying elements, and comes equipped with either two or four Black Berkey® purifying elements (depending on model selected.) The Berkey Light® purification process is gravity driven, requiring no electricity or water pressure. This makes Berkey® systems completely and easily portable.
Standard Berkey Light® Model: The standard Berkey Light® is non-illuminated. Its Copolyester shell is tough, yet lightweight compared to similarly sized purifiers made of other materials.
Two Illuminated Models: In addition to the standard model, the Berkey Light® is available in two models that offer LED illumination in either white or cobalt blue color. "LED" stands for "Light Emitting Diode"; LEDs are solid state lamps that have no filaments to break. Their power consumption is extremely low, and life span averages 100,000 hours—more than 11 years of continuous use. Water purification performance is identical for all three Berkey Light® models (the LED's themselves do not have any role in purification.) The LED-equipped models provide illumination that guides users to the water supply at night when other lighting isn't available, and also provide area lighting that's bright enough for reading near the purifier (the white is much brighter than the blue.) The LED lamps can be powered by the included AC adapter, and rechargeable internal batteries, also included, will operate the LEDs all night on a single charge from the AC adapter. An optional solar charger with internal NiMH battery set also can be used to power and/or recharge the LED base as well as most other battery powered devices you use.
Unequalled Effectiveness: Berkey® purifiers using the Black Berkey® purification elements are proven to reduce pathogenic bacteria (including E. Coli, Klebsiella, Pseudomonas Aeruginosa, Giardia and Cryptosporidium) by 99.99999%. The Berkey Light® System has been tested with the highest pathogenic contamination levels that can be produced in a laboratory. When contamination levels exceed one billion pathogens per liter of water (10,000 times the density of contamination used in the standard test protocol for bacteriological removal) they're classified as "TNTC" (too numerous to count.) Under normal testing protocol, one pathogenic organism is tested at a time, each with a fresh purifying element. For this test, however, the laboratory was directed to combine three separate pathogenic TNTC cultures. Tested under this extreme contamination level, absolutely no pathogens were able to make it through the purification elements. The laboratory then incubated the water, and nothing grew. When the filtered water was viewed under an electron microscope not even in-viable (dead) microbes were detectable—nothing was present but pure H2O. Furthermore, contaminants reduced to below-detectable-limits include Trihalomethanes, Radon 222, and volatile organic compounds including Benzene, 2,4-D, Heptachlor, MTBE, Styrene, Tetrachloroethylene and Toulene, among many others.
Dimensions: 9"D x 26.5"H with base (21"H w/o base)
Capacity: 2.75 gallons
Flow Rate: 8.5 gallons per hour when full, if four elements are installed (4.25 gallons per hour with two elements installed.) (This is 204/102 gallons in 24 hours.) The flow rate of all gravity filters is highest when the prefiltered tank is full.
Warranted by manufacturer: Read warranty
Berkey Light purifiers are now available equipped with either 2 or 4 Black Berkey purifier elements.
(The 2-element units do have four purifier-mounting holes, two of which come plugged, so you can operate with 4 elements later if you wish.) |
Berkey Light Standard, 2 Elements: $275.00 |
Berkey Light White LED & 2 Elements: 369.00 |
Berkey Light Blue LED & 2 Elements: $356.00 |
Berkey Light Standard, 4 Elements: $389.00 |
Berkey Light White LED & 4 Elements: 470.00 |
Berkey Light Blue LED & 4 Elements: $470.00 |
See our sale prices below! |
See below for the optional Berkey MP Solar Charger
Please note: Berkey Light® systems are not yet available for shipment to Iowa, and shipment to California is restricted for some products. The Berkey Light system with 2 elements preinstalled (with or without LED lighting) MAY be shipped to California. The Berkey Light system that comes with 4 elements preinstalled may not be shipped to California at this time. Every Berkey Light system has four holes in the bottom of the upper chamber, to accommodate the user's choice of two, three or four purifier elements. In the California-shippable Berkey Light systems that come with 2 elements, two of the holes come with removable rubber plugs in them. Please also note that replacement Black Berkey elements ARE available for shipment to California. You can read a bit more about all of this
here.
After four years of experience with Pleasant Hill Grain, I can't think of another company of any kind that I can recommend as highly as yours. Your service is outstanding; it's a real pleasure doing business with you. – Lori Itano, Wheaton IL
|
|